The Ford Mustang is a car manufactured by the Ford Motor Company. It was initially based on the second generation North American Ford Falcon, a compact car. Introduced early on April 17, 1964, the 1965 Mustang was the automaker's most successful launch since the Model A. The Mustang created the "pony car" class of American automobile — sports car-like coupes with long hoods and short rear decks — and gave rise to competitors such as GM's Chevrolet Camaro, AMC's Javelin, and Chrysler's revamped Plymouth Barracuda. It also inspired coupés such as the Toyota Celica and Ford Capri, which were exported to the United States. The Mustang is Ford's third oldest nameplate in production and has undergone several transformations to its current fifth generation. Production of the 1965 Mustang (VIN coded by Ford and titled as 1965 models) began in Dearborn, Michigan on March 9, 1964 and the car was introduced to the public on April 17, 1964 at the New York World's Fair. It is Ford's third oldest nameplate[citation needed] currently in production next to the F-Series pickup truck line (which has undergone major nameplate changes over the years) and the Falcon that is still in production in Australia. Executive stylist Pres Harris, who was a fan of the World War II P-51 Mustang fighter plane, is believed by many to have suggested the name and designed the body. An alternative view was that Robert J. Eggert, Ford Division market research manager, first suggested the Mustang name. Eggert, a breeder of quarterhorses, received a birthday present from his wife of the book, The Mustangs by J. Frank Dobie in 1960. Later, the book’s title gave him the idea of adding the “Mustang” name for Ford’s new concept car. The designer preferred Cougar or Torino (and an advertising campaign using the Torino name was actually prepared), while Henry Ford II wanted T-bird II. As the person responsible for Ford’s research on potential names, Eggert added “Mustang” to the list to be tested by focus groups; “Mustang,” by a wide margin, ” came out on top under the heading: “Suitability as Name for the Special Car.” The name could not be used in Germany, however, because it was owned by Krupp, which had manufactured trucks between 1951 and 1964 with the name Mustang. Ford refused to buy the name for about USD$10,000 from Krupp at the time. Kreidler, a manufacturer of mopeds, also used the name so Mustang was sold in Germany as the "T-5" until December 1978. Mustangs grew larger and heavier with each model year until, in response to the 1971–1973 models, Ford returned the car to its original size and concept for 1974. It has since seen several platform generations and designs. Although some other pony cars have seen a revival, the Mustang is the only original pony car to remain in uninterrupted production over four decades of development and revision.
As Lee Iacocca's assistant general manager and chief engineer, Donald N. Frey was the head engineer for the T-5 project—supervising the overall development of the car in a record 18 months — while Iacocca himself championed the project as Ford Division general manager. The T-5 prototype was a two-seat, mid-mounted engine roadster. This vehicle employed a Taunus (Ford Germany) V4 engine and was very similar in appearance to the much later Pontiac Fiero. It was claimed that the decision to abandon the two-seat design was in part due to the low sales experienced with the 2-seat 1955 Thunderbird. To broaden market appeal it was later remodeled as a four-seat car (with full space for the front bucket seats, as originally planned, and a rear bench seat with significantly less space than was common at the time). A "Fastback 2+2" model traded the conventional trunk space for increased interior volume as well as giving exterior lines similar to those of the second series of the Corvette Sting Ray and European sports cars such as the Jaguar E-Type.The "Fastback 2+2" was not available as a 1964½ model, but was first manufactured on August 18, 1964. Lee Iacocca, who had been one of the forces behind the original Mustang, became President of Ford Motor Company in 1970 and ordered a smaller, more fuel-efficient Mustang for 1974. Initially it was to be based on the Ford Maverick, but ultimately was based on the Ford Pinto subcompact. The new model, called the "Mustang II, was introduced two months before the first 1973 oil crisis, and its reduced size allowed it to compete against imported sports coupés such as the Japanese Toyota Celica and the European Ford Capri (then Ford-built in Germany and Britain, sold in U.S. by Mercury as a captive import car). First-year sales were 385,993 cars, compared with the original Mustang's twelve-month sales record of 418,812. The 1979 Mustang was based on the larger Fox platform (initially developed for the 1978 Ford Fairmont and Mercury Zephyr). The interior was restyled to accommodate four people in comfort despite a smaller rear seat. The trunk was larger, as was the engine bay, for easier service access.Body styles included a coupé, (notchback), hatchback, and convertible. Available trim levels included L, GL, GLX, LX, GT, Turbo GT (1983–84), SVO (1984–86), Cobra (1979–81; 1993), and Cobra R (1993).In 1994 the Mustang underwent its first major redesign in fifteen years. Code-named "SN-95" by the automaker, it was based on an updated version of the rear-wheel drive Fox platform called "Fox-4." The new styling by Patrick Schiavone incorporated several styling cues from earlier Mustangs. For the first time since 1973, a hatchback coupe model was unavailable.At the 2004 North American International Auto Show, Ford introduced a completely redesigned Mustang, codenamed "S-197," that was based on an all-new D2C platform for the 2005 model year. Developed under the direction of Chief Engineer Hau Thai-Tang and exterior styling designer Sid Ramnarace, the fifth-generation Mustang's styling echoes the fastback Mustangs of the late 1960s. Ford's senior vice president of design, J Mays, called it "retro-futurism." The fifth-generation Mustang is manufactured at the AutoAlliance International plant in Flat Rock, Michigan.
The Mustang made its first public appearance on a racetrack little more than a month after its April 17 introduction, as pace car for the 1964 Indianapolis 500. The same year, Mustangs achieved the first of many notable competition successes, winning first and second in class in the Tour de France international rally. The car’s American competition debut, also in 1964, was in drag racing, where private individuals and dealer-sponsored teams campaigned Mustangs powered by 427 cu. in. V8s. In late 1964, Ford contracted Holman & Moody to prepare ten 427-powered Mustangs to contest the National Hot Rod Association's (NHRA) A/Factory Experimental class in the 1965 drag racing season. Five of these special Mustangs made their competition debut at the 1965 NHRA Winternationals, where they qualified in the Factory Stock Eliminator class. The car driven by Bill Lawton won the class. A decade later Bob Glidden won the Mustang’s first NHRA Pro Stock title. Early Mustangs also proved successful in road racing. The GT 350 R, the race version of the Shelby GT 350, won five of the Sports Car Club of America's (SCCA) six divisions in 1965. Drivers were Jerry Titus, Bob Johnson and Mark Donohue, and Titus won the (SCCA) B-Production national championship. GT 350s won the B-Production title again in 1966 and 1967. They also won the 1966 manufacturers’ championship in the inaugural SCCA Trans-Am series, and repeated the win the following year. In 1969, modified versions of the 428 Mach 1, Boss 429 and Boss 302 took 295 United States Auto Club-certified records at Bonneville Salt Flats. The outing included a 24-hour run on a 10-mile (16 km) course at an average speed of 157 miles per hour (253 km/h). Drivers were Mickey Thompson, Danny Ongais, Ray Brock and Bob Ottum. Boss 429 engines powered Ford Torinos in 1969 and 1970 NASCAR racing. In 1970, Mustang won the SCCA Trans-Am series manufacturers’ championship again, with Parnelli Jones and George Follmer driving for car owner/builder Bud Moore and crew chief Lanky Foushee. Jones won the "unofficial" drivers’ title. 1970 was of special significance as the only year that all the "pony" car manufacturers fielded "factory" teams with world-class drivers... Ford beat Chevrolet, Pontiac, Plymouth, Dodge and AMC. Two years later Dick Trickle won 67 short-track oval feature races, a national record for wins in a single season. In 1975 Ron Smaldone's Mustang became the first-ever American car to win the Showroom Stock national championship in SCCA road racing. Mustangs also competed in the IMSA GTO class, with wins in 1984 and 1985. In 1985 John Jones also won the 1985 GTO drivers’ championship; Wally Dallenbach Jr., John Jones and Doc Bundy won the GTO class at the Daytona 24 Hours; and Ford won its first manufacturers’ championship in road racing since 1970. Three class wins went to Lynn St. James, the first woman to win in the series. In 1986 brought eight more GTO wins and another manufacturers’ title. Scott Pruett won the drivers’ championship. The GT Endurance Championship also went to Ford. In drag racing Rickie Smith’s Motorcraft Mustang won the International Hot Rod Association Pro Stock world championship. In 1987 Saleen Autosport Mustangs driven by Steve Saleen and Rick Titus won the SCCA Escort Endurance SSGT championship, and in International Motor Sports Association (IMSA) racing a Mustang again won the GTO class in the Daytona 24 hours. In 1989, its silver anniversary year, the Mustang won Ford its first Trans-Am manufacturers’ title since 1970, with Dorsey Schroeder winning the drivers’ championship. In 1997, Tommy Kendall’s Roush-prepared Mustang won a record 11 consecutive races in Trans-Am to secure his third straight driver’s championship. In 2002 John Force broke his own NHRA drag racing record by winning his 12th national championship in his Ford Mustang Funny Car, Force beat that record again in 2006, becoming the first ever 14-time champion, again, driving a Mustang. Currently Mustangs compete in several racing series, including the Mustang Challenge for the Miller Cup and the KONI Challenge, where it won the manufacturer's title in 2005 & 2008, and the Canada Drift, Formula Drift and D1 Grand Prix series. They are highly competitive in the SCCA World Challenge, with Brandon Davis winning the 2009 GT driver's championship. As reported by Jayski.com, the Ford Mustang will be Ford's Car of Tomorrow for the NASCAR Nationwide Series in 2010, opening a new chapter in both Mustang's history and Ford's history. NASCAR insiders expect to see Mustang racing in NASCAR Sprint Cup by 2014 (the model's 50th anniversary). Unlike other racing series, the NASCAR vehicles are not based on production Mustangs, but are a silhouette racing car with decals that give them a superficial resemblance to the production road cars.
As Lee Iacocca's assistant general manager and chief engineer, Donald N. Frey was the head engineer for the T-5 project—supervising the overall development of the car in a record 18 months — while Iacocca himself championed the project as Ford Division general manager. The T-5 prototype was a two-seat, mid-mounted engine roadster. This vehicle employed a Taunus (Ford Germany) V4 engine and was very similar in appearance to the much later Pontiac Fiero. It was claimed that the decision to abandon the two-seat design was in part due to the low sales experienced with the 2-seat 1955 Thunderbird. To broaden market appeal it was later remodeled as a four-seat car (with full space for the front bucket seats, as originally planned, and a rear bench seat with significantly less space than was common at the time). A "Fastback 2+2" model traded the conventional trunk space for increased interior volume as well as giving exterior lines similar to those of the second series of the Corvette Sting Ray and European sports cars such as the Jaguar E-Type.The "Fastback 2+2" was not available as a 1964½ model, but was first manufactured on August 18, 1964. Lee Iacocca, who had been one of the forces behind the original Mustang, became President of Ford Motor Company in 1970 and ordered a smaller, more fuel-efficient Mustang for 1974. Initially it was to be based on the Ford Maverick, but ultimately was based on the Ford Pinto subcompact. The new model, called the "Mustang II, was introduced two months before the first 1973 oil crisis, and its reduced size allowed it to compete against imported sports coupés such as the Japanese Toyota Celica and the European Ford Capri (then Ford-built in Germany and Britain, sold in U.S. by Mercury as a captive import car). First-year sales were 385,993 cars, compared with the original Mustang's twelve-month sales record of 418,812. The 1979 Mustang was based on the larger Fox platform (initially developed for the 1978 Ford Fairmont and Mercury Zephyr). The interior was restyled to accommodate four people in comfort despite a smaller rear seat. The trunk was larger, as was the engine bay, for easier service access.Body styles included a coupé, (notchback), hatchback, and convertible. Available trim levels included L, GL, GLX, LX, GT, Turbo GT (1983–84), SVO (1984–86), Cobra (1979–81; 1993), and Cobra R (1993).In 1994 the Mustang underwent its first major redesign in fifteen years. Code-named "SN-95" by the automaker, it was based on an updated version of the rear-wheel drive Fox platform called "Fox-4." The new styling by Patrick Schiavone incorporated several styling cues from earlier Mustangs. For the first time since 1973, a hatchback coupe model was unavailable.At the 2004 North American International Auto Show, Ford introduced a completely redesigned Mustang, codenamed "S-197," that was based on an all-new D2C platform for the 2005 model year. Developed under the direction of Chief Engineer Hau Thai-Tang and exterior styling designer Sid Ramnarace, the fifth-generation Mustang's styling echoes the fastback Mustangs of the late 1960s. Ford's senior vice president of design, J Mays, called it "retro-futurism." The fifth-generation Mustang is manufactured at the AutoAlliance International plant in Flat Rock, Michigan.
0 comments:
Post a Comment