Showing posts with label Peugeot. Show all posts
Showing posts with label Peugeot. Show all posts

Tuesday, August 9, 2011

2012 Peugeot 308

The new Peugeot 308 comes with a new look, features innovative e-HDi micro-hybrid technology and optimises fuel consumption and CO2 emissions, which start from just 98 g/km
With its new lines, the Peugeot 308 subtly incorporates the Marque’s latest stylistic codes. The car’s body follows the contours of the mechanical assembly underneath. The appeal of the three body shapes (Peugeot 308 Saloon, Peugeot 308 CC and Peugeot 308 SW) thus acquires a more technological elegance, illustrated by the presence of LED front lights with light guide. Dynamism and emotion are present as ever in the genes of the 308, particularly with its more assertive look thanks to new Xenon headlamps with titanium coloured mask and the hatchback in its exclusive GTi finish.



Determined to consolidate its leadership in terms of road holding and driving pleasure, the Peugeot 308 seeks to become a reference in terms of environmental efficiency. Indeed, following in the footsteps of the 508, the new Peugeot 308 features innovative e-HDi micro-hybrid technology, the latest generation STOP & START, on the 1.6 litre HDi FAP 112 bhp Euro 5 engine. This offer, on the ‘entry level’ engine, is available with a semi-automatic manual gearbox and, for the first time, with a full manual gearbox, for optimal driveability.



2012 Peugeot 508 RXH

2012 Peugeot 508 RXH. Diesel-electric hybrid and distinctive high end appeal combine to offer an original view of the world of all-road vehicles and enhanced driving pleasure: the new Peugeot 508 RXH. This demonstrates the modern and enhanced top-of-the-range vision for Peugeot and will be unveiled today in preview. The style of the Peugeot 508 RXH and its innovative HYbrid4 drive unit provide features allowing it to combine freedom and driving pleasure in a form never seen before in the segment: 200 bhp, Four-wheel drive, ZEV 100% electric mode, Emissions of 109 g/km of CO2.


After the launch of the 508 Saloon and SW in spring 2011, acclaimed for its styling elegance, its presence and its high-level build-quality and attention to detail, the Peugeot 508 RXH again raises the profile of the entire Peugeot brand reinforcing its technological and environmental lead.
Its posture and its specific design immediately place it in the world of top-of-the-range all road vehicles. Unique, refined, raised, widened, it is also distinguished by a singular visual signature, with its distinctive LED lights visible both at day and night, giving an impression of three vertical ‘lions’ claws on each side of its ‘floating’ grille, the style of which is even more striking.
To reinforce its exclusive character, the interior of the Peugeot 508 RXH benefits from special features with distinctive colours and luxurious materials, like its premium quality interior and upholstery.


Its unique level of finish and equipment is coherent with the top-of-the-range and technological positioning of the vehicle. Richly equipped as standard (Open & Go system, electric front seats, head up display, 18″ wheels, panoramic glass roof, dark-tinted acoustic laminated side windows, latest generation audio and satellite navigation unit, it welcomes its occupants with care, refinement and a high level of comfort.
Equipped with the 2.0 l HDi FAP HYbrid4 drive train, a world first when featured in the 3008 Hybrid4, the diesel-electric hybrid drive unit in the Peugeot 508 RXH extends driving pleasure and freedom to …

Monday, August 8, 2011

2012 Nissan Versa Hatchback

The 2012 Nissan Versa Hatchback is offered in 1.8 S and 1.8 SL models, each equipped with a 122-horsepower 1.8-liter DOHC 4-cylinder engine. The Nissan Versa Hatchback S is available with a choice of 6-speed manual or 4-speed automatic, while the Hatchback 1.8 SL is offered exclusively with Nissan’s advanced Xtronic CVT® transmission.


The 2012 Nissan Versa Hatchback long 102.4-inch wheelbase and short front and rear overhangs create a sporty dynamic look. The Versa Hatchback exterior also features body-color front and rear bumpers and body-color dual remote-controlled outside mirrors. Versa Hatchback has a coefficient of drag of 0.31. Versa Hatchback 1.8 SL models add a higher level of performance styling with a roof-mounted rear spoiler, lower body side sill extensions, unique front and rear fascia and standard fog lights.
The 2012 Nissan Versa Hatchback is available in nine exterior colors: Red Alert, Metallic Blue, Blue Onyx, Espresso Black, Brilliant Silver, Magnetic Gray, Super Black, Fresh Powder and Arctic Blue.
Every 2012 Nissan Versa Hatchback comes equipped with a standard 1.8-liter DOHC 4-cylinder engine rated at 122 horsepower and 127 lb-ft of torque. Three transmissions are offered – a 6-speed manual (1.8 S), an electronically controlled 4-speed automatic with overdrive (optional 1.8 S), and Xtronic CVT™ transmission (standard on 1.8 SL).
Fuel economy for the 2012 Nissan Versa Hatchback is rated at 28 mpg City/34 mpg Highway with the Continuously Variable Transmission; 24 mpg City/32 mpg highway with the 4-speed automatic transmission; and 26 mpg City/31 mpg Highway with the 6-speed manual transmission.
All 2012 Nissan Versa Hatchbacks are equipped with an independent MacPherson strut front suspension and torsion beam rear suspension, with front and rear stabilizer bars. Other standard equipment includes Electric Power Steering and power-assisted front disc/rear drum brakes and Anti-lock Braking System (ABS) with Electronic Brake force Distribution (EBD) and Brake Assist (BA). Vehicle Dynamic Control (VDC) is also standard.
Nissan Versa Hatchback 1.8 S models feature 15-inch styled steel wheels with covers and P185/65HR15 Continental all-season tires. Nissan Versa Hatchback 1.8 SL models offer standard 16-inch aluminum-alloy wheels with Continental P195/55R16 all-season tires, while 6-spoke 15-inch aluminum-alloy wheels are optional on 1.8 S models equipped with the 4-speed automatic transmission.
The 2012 Nissan Versa Hatchback is manufactured at Nissan’s Aguascalientes and Cuervanaca, Mexico assembly plants.

Brabus Mercedes-Benz SLK-Class

A sporty designer suit, custom-tailored wheels with diameters of up to 20 inches complete with corresponding suspension options, performance tuning for all engines and exclusive interior design: Brabus now offers an extensive customization program for the new Mercedes SLK.
Sporty-elegant Brabus aerodynamic-enhancement components give the roadster an even more thrilling appearance. The two Brabus front spoiler lips that attach on the left and right side of the production apron and the striking bezels for the daytime running lights lend the SLK a more striking nose. But that's not all: the spoilers also reduce lift on the front axle which particularly benefits directional stability at high speeds.

The Brabus side sill attachments emphasize the sporty lateral lines of the car and seem to make the rear fenders wider visually. The rear of the car receives some added sporty character with the Brabus diffuser and the Brabus rear spoiler on the trunk lid. The diffuser is integrated with utmost precision into the production bumper and features a centrally mounted rear reflector. These aerodynamic-enhancement components also serve more than just a visual function; they reduce lift in the rear as well.
A major contribution to the sporty appearance of the new SLK from Bottrop likewise comes from the Brabus Monoblock wheels, which are available in various one-piece or multi-piece designs with diameters ranging from 17 to 20 inches.
The attached photos show the roadster equipped with Brabus Monoblock F wheels painted the new exclusive 'Liquid Titanium' color. They are mounted in size 8.5Jx20 in front and in size 9.5Jx20 on the rear axle. Brabus recommends high-performance tires from Continental, Pirelli or Yokohams in sizes 235/30 ZR 20 on the front axle and 275/25 ZR 20 in back.
Brabus sport springs were custom-developed to match the conversion to these king-sized tires. They are calibrated to work with the production shocks, and lower the ride height of the two-seater by some 30 millimeters (1.2 inches). Brabus also offers various versions of its high-performance brake systems for the new SLK.
These measures furthermore make the new SLK perfectly suited for some extra power. In a first step Brabus offers efficient and reasonably priced Brabus ECO PowerXtra CGI tuning for the four-cylinder direct-injection engines. The processor-controlled Brabus ECO PowerXtra CGI auxiliary control modules are custom-tailored to each respective engine variant and can be installed by any authorized Mercedes-Benz dealer in less than an hour thanks to their 'plug and play' design. All performance kits are backed by the one-of-a-kind Brabus Tuning Warranty® of three years, up to 100,000 kilometers / 62,000 miles (updated November 2006). Brabus recommends Aral high-performance lubricants.
To retain the engine's longevity and fatigue strength these kits are designed to only activate the performance-enhancing mapping when all parameters such as engine temperature etc. are in the green. This effectively prevents the performance increase from negatively affecting the service life of the engine.
After the installation of the Brabus ECO PowerXtra B20 CGI performance kit the four-cylinder direct-injection engine of the SLK 200 BlueEFFICIENCY produces an extra 26 hp (25 bhp) / 19 kW of power and an additional 30 Nm (22 lb-ft) of peak torque.

The new SLK 250 BlueEFFICIENCY can be upgraded at Brabus in two stages. The Brabus ECO PowerXtra B25 CGI module bumps power output of the four-cylinder direct-injection engine from standard 204 hp (201 bhp) / 150 kW to 230 hp (226 bhp) / 169 kW at just 5,500 rpm.
Another ten additional horsepower can be realized with the supplementary installation of a larger intercooler and an electronically controlled Brabus sport wastegate valve that are part of the Brabus ECO PowerXtra B25S CGI performance kit. 240 hp (236 bhp) / 176 kW of power and 370 Nm (273 lb-ft) of torque in overboost mode accelerate the two-seater in 6.2 seconds from rest to 100 km/h on the way to a top speed of 248 km/h (154 mph).
On the road all CGI engines performance-tuned by Brabus deliver not just excellent driving performance but also optimized pulling power from low engine speeds and favorable fuel economy. Just as important for the Brabus engine specialists were exemplary low emissions: like the corresponding non-tuned engines all engines with Brabus ECO PowerXtra CGI performance kit meet strict Euro V emission limits.
The installation of the Brabus stainless-steel sport exhaust system is advantageous not only for tuned engines. Its four tailpipes featuring the typical Brabus design not only give the roadster an even more exclusive appearance but also produce an even sportier exhaust note for all engine variants.
Another focus of the Brabus refinement of the new Mercedes SLK is the interior. Brabus offers an extensive program for the roadster: it includes attractive accessories such as high-gloss polished stainless-steel scuff plates with Brabus logo and sporty elements such as aluminum foot pedals and shifter.
Requests for even more individuality can be fulfilled by the Brabus upholstery shop in the form of exclusive interiors crafted from especially soft and breathable Brabus Mastik leather and Alcantara.

Sunday, August 7, 2011

Audi R8 Ready Released

Audi R8 has been rumored to be leaked. This car will get some tweaks refined style, has a V8 and V10 engines and the new S tronic transmission. Audi plans to release next year. Audi R8 kelihatn only slightly older than the type-type now.
Audi R8 will have a revised 4.2-liter V8 FSI is similar to units used in the current Audi RS5, producing 331kW but take more R8 ride is currently 4.2 to 309kW. 5.2-liter V10 variant would get a fair share of massages as well, producing 397kW – up from 386kW.

Another change contained in the R8 is said to include a choice of dual-clutch transmission that will replace the S Tronic R Tronic somewhat criticized in place today. A, which normally gated six-speed manual will continue as before, and some subtle tweaks, such as the placement of LED lights and revision. The front and rear bumper bar is also expected to accept some changes.

Sunday, July 31, 2011

2011 Bugatti Veyron Grand Sport L’Or Blanc

The Bugatti Veyron Grand Sport L’Or Blanc is the world’s first automobile to be equipped with porcelain, and the development team invested a lot of effort to guarantee that each item is capable of performing in every driving situation in the most powerful car on the market. Before their application to the car, the porcelain elements were extensively examined in regard to automotive safety and quality to optimally protect the passengers in case of an accident.
As part of the exterior design, porcelain is used for the inlays of the centre wheel badges, the fuel filler cap and the oil filler cap as well as the signature “EB” badge at the rear. Their shiny white surface blends in with the brilliant bright finish of the paint suggesting that the car would be coated with a thin layer of porcelain, too.
Besides the signed porcelain inlays on the sides of the centre console, an intarsia made of finest porcelain is fixed to the rear panel between the seats. Similar to the exterior porcelain elements this item carries the relief of the famous elephant in an upright standing position that has been created by sculptor Rembrandt Bugatti. His brother Ettore had used the original draft to cast the radiator mascot for the Bugatti Royale. This elephant is a synonym for the brand still today. Embedded in the top of the centre console, there is a fine porcelain dish with edges finished in an exclusive diamond polishing – a technique that has been applied by the Königliche Porzellan-Manufaktur Berlin for the very first time.

The Bugatti Veyron Grand Sport L’Or Blanc presented in Berlin, is a one-of-a-kind creation. Nevertheless, the partnership is supposed to be continued, and Bugatti’s designers received a lot of inspiration from porcelain painting offering a variety of new opportunities for the design. The price of the
Bugatti L’Or Blanc is 1.65 m EUR.

Jaguar XKR

The Jaguar XK was the first car created entirely under the aegis of Design Director Ian Callum. Dramatic and purposeful, yet as sensuous as only a Jaguar can be, the XK now receives a number of revisions that reinforce its contemporary, assertive character.
The latest lighting technology has allowed the front headlamps to be made slimmer and at the same time incorporate LED signal functions and running lights. Combined with a larger grille and new bumper design, this gives the XK instant 'rear-view mirror' recognition. Unmistakably a Jaguar, each model in the range gains unique styling attributes that distinguish it from its siblings. Chrome mesh grilles on the XK are replaced with matt black detailing on the XKR while the flagship XKR-S receives a unique front bumper underlining its sense of purpose.

The power vent along the front wing has been altered from a vertical to horizontal design with a mesh insert. Emblazoned with the Jaguar name, it serves to emphasise the potential inherent in the XK's design. To the rear, the boot lid has been revised with a slimmer chrome finisher which allows the car to be graced by the famous Jaguar 'leaper', bringing it into line with the rest of the company's products.
Complementing the design changes are 17 paint colours, five of which are new and a range of alloy wheels that now total 11 different designs ranging in size from 18 to 20 inches. A further opportunity for owners to express their individuality is available through the 'Black Pack', now also available as an option on the naturally aspirated cars as well as the Jaguar XKR. This replaces exterior chrome with a matt black finish, complemented by 20-inch gloss black alloy wheels. On the Jaguar XKR, the package also includes body coloured aerodynamic enhancements and optional side graphics.

Tuesday, July 19, 2011

Mercedes C-Class DR 520

Mercedes-Benz UK has launched an exclusive new model, the Mercedes-Benz C-Class DR 520 with more power and performance than any other C-Class. Only 20 units of this car will be available, and it is sold exclusively through the company's Specialist Products division at Mercedes-Benz World at Brooklands, Surrey.

Based on the high-performance C63 AMG, the Mercedes-Benz C-Class DR 520 has a performance upgrade and boasts 520 hp and 650 Nm of torque, a 60 hp and 50 Nm advantage over than the standard C63 AMG. The Mercedes-Benz C-Class DR 520 Saloon can reach 0-62 mph in just 4.1 seconds with the Estate achieving the same in 4.2 seconds, and both are electronically limited to a top speed of 187 mph.
The AMG Performance Pack Plus is fitted to the Mercedes-Benz C-Class DR 520 as standard and features AMG's high-performance braking system with red calipers, with the addition of engine upgrades in the form of forged pistons, newly-developed connecting rods and a revised crankshaft, as well as an AMG Carbon Fibre rear spoiler for the Saloon.
Available with a black or white matt wrap and complimented by Titanium finish alloy wheels, grille and discreet DR 520 badging on the wing and the boot lid, the Mercedes-Benz C-Class DR 520 combines stealthy looks with potent performance.
Inside, the sports seats are upholstered in leather and exclusive Alcantara finished with red or white contrast stitching, as is the dashboard and upper door panels. The multi-function AMG Performance steering wheel is clad in Nappa leather and Alcantara.
Nigel Unsworth, Specialist Products Division Manager commented: "We wanted to launch the Specialist Products Division with something unique - and the Mercedes-Benz C-Class DR 520 fits the bill perfectly. Mercedes-Benz World is located at Brooklands, and there's a proud history of 'Brooklands Specials' being sold here over the years. The Mercedes-Benz C-Class DR 520 - which is dyno-rated at 520 hp - is our chance to create an exclusive model in the UK. It's a great opportunity for us to offer our customers who enjoy sports and supercars a bespoke car with even more performance than the already very successful C63 AMG. And as well as the increased performance, it looks incredible, too."
The Mercedes-Benz C-Class DR 520 costs £9,995 above the standard C63 AMG price, making the DR 520 Saloon £62,430 OTR and the Estate £63,680 OTR. The cars are also backed by a three-year, 60,000 mileage warranty.

Saturday, July 16, 2011

Mercedes M-Class

he third generation of the Mercedes-Benz M-Class sets new benchmarks in the SUV world with its leading-edge automotive technology. The new M-Class boasts optimum energy efficiency, leading standards of passive safety, outstanding ride comfort combined with superb driving dynamics, as well as a completely revamped interior design offering excellent ergonomics among its key strengths.

The low fuel consumption and exemplary emissions figures make impressive reading - on average, the entire model range burns 25 percent less fuel than the predecessor. Never before has Mercedes-Benz succeeded in cutting fuel consumption by such a huge margin with an SUV model change. An ultramodern engine line-up, a class-beating Cd value of 0.32, extensive BlueEFFICIENCY measures, as well as new development tools such as the "energy-transparent vehicle" all play their part in delivering the good energy efficiency figures. The ML 250 BlueTEC 4MATIC is particularly outstanding in this respect: it is 28 percent more economical than its predecessor, consumes just 6.0 l per 100 km on the NEDC driving cycle (158 g CO2/km) and can cover as much as 1500 kilometres on a single tank of fuel.

In line with the Mercedes-Benz brand philosophy, the new Mercedes-Benz M-Class represents the embodiment of the Mercedes-Benz holistic safety concept of Real Life Safety, which is derived from what happens in a real accident situation. In combination with the front and rear deformation zones, the high-strength passenger cell of the M-Class provides a highly effective foundation for the occupant protection systems. Both active safety and driver-fitness safety in the new M-Class are further improved by assistance systems that will already be familiar, primarily from the S-Class and E-Class.

Peugeot 508 RXH

Diesel-electric hybrid and distinctive high end appeal combine to offer an original view of the world of all-road vehicles and enhanced driving pleasure: the new Peugeot 508 RXH.This demonstrates the modern and enhanced top-of-the-range vision for Peugeot and will be unveiled today in preview. The style of the Peugeot 508 RXH and its innovative HYbrid4 drive unit provide features allowing it to combine freedom and driving pleasure in a form never seen before in the segment: 200 bhp, Four-wheel drive, ZEV 100% electric mode, Emissions of 109 g/km of CO2.

After the launch of the 508 Saloon and SW in spring 2011, acclaimed for its styling elegance, its presence and its high-level build-quality and attention to detail, the Peugeot 508 RXH again raises the profile of the entire Peugeot brand reinforcing its technological and environmental lead.
Its posture and its specific design immediately place it in the world of top-of-the-range all road vehicles. Unique, refined, raised, widened, it is also distinguished by a singular visual signature, with its distinctive LED lights visible both at day and night, giving an impression of three vertical 'lions' claws on each side of its 'floating' grille, the style of which is even more striking.

To reinforce its exclusive character, the interior of the Peugeot 508 RXH benefits from special features with distinctive colours and luxurious materials, like its premium quality interior and upholstery.
Its unique level of finish and equipment is coherent with the top-of-the-range and technological positioning of the vehicle. Richly equipped as standard (Open & Go system, electric front seats, head up display, 18" wheels, panoramic glass roof, dark-tinted acoustic laminated side windows, latest generation audio and satellite navigation unit, it welcomes its occupants with care, refinement and a high level of comfort.
Equipped with the 2.0 l HDi FAP HYbrid4 drive train, a world first when featured in the 3008 Hybrid4, the diesel-electric hybrid drive unit in the Peugeot 508 RXH extends driving pleasure and freedom to travel anywhere on all roads. With a maximum power of 147 kW (200 bhp), four-wheel drive and a maximum torque of 450 Nm, the Peugeot 508 RXH has been designed to adapt to all uses, in a spectrum of (all) conditions. Furthermore, it opens up new perspectives in the segment, offering a ZEV 100% electric mode, ideal for driving in town and for reducing consumption in the Combined Cycle to less than 4.2 l/100 km (70.6 mpg), with emissions of 109 g/km of CO2.
After the launch of the 3008 HYbrid4, the Peugeot Marque will continue its innovative strategy, combining driving sensations and advanced environmental developments, extending HYbrid4 technology to other models.
The Peugeot 508 RXH will be unveiled as a world premiere at the Frankfurt International Motor Show in September 2011, and is on sale in spring 2012.

Saturday, July 2, 2011

Friday, July 1, 2011

2012 Peugeot 308







Nissan Juke

Nissan Juke is set to change the urban landscape... for the third time. Following in the wheeltracks of the Murano large crossover and then the successful Qashqai - the car that three years ago introduced the concept of a crossover as an alternative to the traditional C-segment hatchback - comes its younger brother, the Nissan Juke.

Designed to bring a breath of fresh air to the B-segment, Nissan Juke is a distinctive combination of SUV toughness and sporting style. Conceived to inject some masculinity and dynamism into the small car market, Nissan Juke combines a number of seeming contradictions beneath its highly individual lines.
"It takes the best elements of an SUV and sports car and combines them," says Pierre Loing, Vice President, Product Planning, Nissan Europe. "It's roomy yet compact, robust yet dynamic and practical yet playful. These are qualities that seem to contradict each other, yet come together in Nissan Juke to create something that's genuinely unique."
Nissan Juke was created at Nissan Design Europe (NDE) in the heart of London, and refined at Nissan's Design Centre (NDC) in Japan. Principle engineering took place in Japan with significant European input and Juke will be built in Nissan's factory in Sunderland in the north-east of England.
"The design shows real optimism. By combining design elements from two genres to create a small, but striking Crossover that displays a genuine confidence and style. And those are qualities we also expect to find in a Nissan Juke customer," said Shiro Nakamura, Senior Vice President for Design and Chief Creative Officer

From a design standpoint, the lower portion of Nissan Juke is pure SUV, with chunky wheels, wide tyres, extended ground clearance and a robust stance. But the top portion is unadulterated sports car, with a high waistline, slim visor-like side glass graphics and a coupé-style falling roofline. The coupé effect is further underlined by the rear doors which have their handles hidden in the frame of the door.
Inside, the sports car theme continues with a driver-focused cabin dominated by a centre console design inspired by a motorcycle fuel tank. Finished in a distinctive high gloss colour, the 'bike' console adds a sense of fun to the car. Practicality is assured by the rear-opening hatch and versatile luggage area with hidden storage opportunities.
Based on the Renault Nissan Alliance B platform, Nissan Juke has a 2530mm wheelbase. On front-wheel drive versions, suspension is by MacPherson struts at the front with a torsion beam at the rear while four-wheel drive models have a multi-link rear suspension modelled on the system found on Qashqai.
The All-Mode 4x4-i is a new development of Nissan's respected electronic all-wheel drive system and now features torque vectoring technology to enhance agility and reduce understeer when cornering.
In Europe, three different engines will be available when sales start later in the year (UK sales begin in October): one diesel and two 1.6-litre petrol units, all fully Euro 5 compliant. At the top of the range is a new turbo-charged petrol engine (MR16DDT) with direct injection. The engine is one of the most powerful in its class, developing 140kW (190PS) and 240 Nm. The combination of direct injection with a turbocharger provides the power and responses expected from a 2.5-litre engine with the economy of a smaller engine.
The second petrol engine is a newly developed version from Nissan's trusted HR-family. Designated HR16DE, the lightweight, low-friction 16-valve unit now has a unique dual injection system allowing finer metering of the fuel sprays for better combustion and develops 86kW (117PS). The K9K 81kW (110PS) 1.5-litre dCi common rail diesel offers excellent driveability - thanks as much to its heady 240 Nm of torque - with good economy and emissions.
In terms of transmissions, the two-wheel drive turbo-charged 1.6-litre petrol engine is available with a six speed manual, while a CVT transmission with a six-speed manual mode will be available on the range-topping all-wheel drive version of the turbo-charged petrol engine.
The naturally aspirated 1.6-litre petrol is available either with a 5-speed manual or the updated XTRONIC CVT and the 1.5-litre diesel engine is available with a 6-speed manual.
Trim and equipment options will follow the established Visia, Acenta and Tekna lines while a full range of accessories has been developed for owners who want to personalise their Nissan Juke still further.
"Nissan Juke is not a traditional B-segment car, and that is quite deliberate. It was born in an urban environment and that is where it will spend most of its life. Fittingly, its combination of agility and toughness make it one of the most streetwise cars around.
"Juke joins Murano and Qashqai to cement Nissan's position as the leading brand in the crossover market," said Simon Thomas, Nissan's European Senior Vice President for Sales and Marketing.
Exterior design
First revealed as the Qazana show car - unveiled at the 2009 Geneva Motor Show - Juke was created at the London-based Nissan Design Europe and refined at Nissan's Design Centre (NDC) in Japan. Qashqai, also created at NDE, is sold in Europe, Asia and Australia while Nissan Juke will be marketed in Europe, Japan and the United States.
"The outcome of this global collaboration is a car that comes from where East meets West, with vital contributions from NDE and NDC being key to creating such a striking design," said Shiro Nakamura.
Its highly individual lines are carried over virtually intact from Qazana. The boldness of the design reflects the significance of the B-segment in the European market: Europe is expected to take the lion's share of sales ahead of the other main markets, including North America and Japan.
The design team drew inspiration for Nissan Juke's design from a number of unusual sources. They looked back at a number of vehicles synonymous with an active and sporting life - and that list included rally cars and motorbikes. It's clear to see where those ideas have influenced the design.
The result combines a number of different themes, but with Nissan DNA threaded through. It has a tough solid body to reflect the SUV element, yet is a very sensual car, too, with complex curves and a coupé profile accentuated by the narrow side glass and hidden rear door handles which help give the impression of two rather than four doors.
But there is also clear Nissan family DNA in the design - the boomerang rear lights, for example, from the 370Z - but none of the elements are slavishly copied so while retaining Nissan DNA, Juke stands alone as a unique, almost maverick, design.
This is a key theme running through Nissan designs. Alfonso Albaisa, Vice President, Nissan Design Europe, says: "Nissan Juke has elements inspired from other cars in our range such as 370Z and even Cube, but our intention is never to make obvious links between our cars but natural ones. Cube is a cool car, for example, and that coolness can also be found in Nissan Juke."
With generous ground clearance, big wheels and tyres, a high waistline and a broad shoulder line, the bottom 'half' of the car appears to be pure SUV. The impression is accentuated by typical SUV features such as the contrasting black sill and wheel arch finishers while at the front and rear, the lower bodywork emerges from underneath the car, resembling underbody protection.
At the front, the 'sump guard' forms part of the air intake assembly but rather than use a simple meshed grille, the design team have developed the moulding into a series of circular slots… which are suggestive of biotic elements.
Above the waistline, however, Nissan Juke shows its sporting credentials. A heavily raked windscreen, complete with Nissan's signature Crossover upswept flick to the rearmost side window - and sloped roof-line provide a profile reminiscent of an aircraft's canopy.
The rear of the roof incorporates an integral spoiler to reduce aerodynamic lift to help high speed stability. The neat duck-tail ridge was perfected with computational fluid dynamics (CFD) and tests in the wind tunnel.
The lights also reflect the car's sporting agility. At the front these are split into two distinct elements. Framing the upper half of the bonnet, thin slashes contain running lights and turn indicators, while the main and dipped beams mounted lower on the nose of the car were inspired by the auxiliary lamps fitted to rally cars in the sixties and seventies. At the rear, the tail-lights put their own spin on the boomerang shaped lamps found on the 370Z.
In total, a nine colour palette of exterior colours is planned, including two whites, a solid and a pearl, and three shades unique to Nissan Juke - Force Red, Haptic Blue and Machine Brown, though the total availability will depend on region.
Seiji Watanabe, Associate Product Chief Designer: "We want our cars, our crossovers in particular, to have a spirit of agility, to be seen as light, nimble, reactive. Nissan Juke displays all these attributes and delivers a real sense of optimism."
Interior design
Nissan Juke's active, sporting exterior is matched by its interior… where the dominant feature also displays a sense of fun: the centre console, finished in a high gloss paint, resembles a motorcycle fuel tank.
"It's unexpected," says Alfonso Albaisa. "And that gives the interior a certain sexiness."
Reflecting the exterior's blending of SUV and sports car attributes, the interior provides the commanding driving position but with all the attributes expected of a sports car. The gear shift sits on the top of the 'motorbiketank' to guarantee slick changes while the tank itself is no mere styling statement but also provides a bracing point for the driver's knee during spirited cornering.
Similarly, the central stack - which incorporates the new Nissan Dynamic Control System - is ergonomically designed to ensure the driver has instant access to the information and drive mode controls.
Attention to detail is evident everywhere. Chrome fittings and high quality materials are used throughout while the interior colours - red or gun metal grey for the central console are available, depending on the grade; black, silver or red accents to the leather or honeycomb 'sports' fabrics - underscore the car's sporting attitude. Even the door arm rests, shaped like flippers used by scuba divers, reflect an active outlook.
Despite its overall compact dimensions, the roomy interior offers competitive levels of space inside: front head room and rear knee room will be sufficient for most occupants. Unlike the Qazana show car, Nissan Juke is a full five seater.
The practical luggage area is large enough to take a nine inch golf bag or a maximum size suitcase and it also includes an underfloor storage area (4wd versions excepted) which takes its potential capacity to 251 litres (VDA). In addition, the rear seats split 60:40, and also fold in one simple movement to provide a totally flat loading floor.
To hide luggage away from prying eyes, the trunk area has an integral tonneau cover which differs from the conventional by being attached to the tailgate and rises with the door when the trunk is opened.
"The interior displays a number of attributes which really sum up the entire car. There's a lot of emotion here, a real sense of fun and a genuine quality," says Albaisa.
Platform
Nissan Juke is based on Renault Nissan Alliance B-Platform and has a 2530mm wheelbase, is 4135mm long, 1765mm wide and 1570mm tall. To allow the top of the range to use 17-inch wheels and 215/55 R17 tyres, the track front and rear is 1525mm, the widest yet seen on the Alliance B-platform.
As new models evolve so a platform will undergo a number of changes, and Nissan Juke's underpinnings are no exception. For its application on Nissan Juke, it has been lengthened, widened and significantly strengthened and lightened to enhance safety, refinement, and fuel efficiency.
Although the basic suspension system mirrors that found on other B-segment cars, with MacPherson struts at the front and a torsion beam at the back, a new cradle-type front subframe has enhanced the lateral stiffness of the assembly. Along with revised front suspension geometry, this has helped to promote better handling and ride comfort along with greater refinement.
The 4wd versions of Nissan Juke further benefit from a new multi-link rear suspension. When coupled to Nissan's newly developed torque vectoring four-wheel drive technology to limit understeer, Nissan Juke's handling is at the top of the class in spite of its higher ground clearance while comfort has been preserved.
In an urban environment, the combination of higher ground clearance and large tyres mean that speed bumps and poor road surfaces will not cause as much discomfort - or damage - as they would to a conventional sports hatchback.
Despite its SUV looks and the comparatively high eye-point, Nissan Juke's front and rear roll centre heights are as low as possible - closer to a conventional hatchback than a typical SUV - to reduce body roll in corners.
Agile handling is also helped by speed sensitive electric power steering, standard on all models, and by increased upper body strength and stiffness. Nissan Juke incorporates a newly developed ring structure which connects the upper body to the rear suspension, thus increasing torsional rigidity.
Engines and drivetrains
In Europe, there will be three engine and manual or CVT transmission choices when Nissan Juke sales start in the second half of 2010. At the top of the range is a newly developed 1.6-litre Direct Injection Gasoline turbocharged engine which develops 140kW (190PS) and 240Nm.
A low friction and lightweight design, the 16 valve engine uses direct injection to improve combustion to optimise power and torque, economy and emissions. The addition of a turbocharger and intercooler helps to boost power - this engine is one of the most powerful in its class - while variable timing control for both intake and exhaust cycles (twin VTC) improves low end engine response. A degree of overlap allows exhaust gas recirculation.
Low friction techniques include the adoption of diamond-like carbon (DLC) coating for the valve lifters and mirror finish camshafts. The result is an engine delivering the performance levels of a normally aspirated 2.5-litre engine but with the fuel economy of a smaller engine.
The Direct Injection Gasoline engine in two-wheel drive versions of Nissan Juke will be coupled to a six-speed manual transmission. On the four-wheel drive version, it will be mated to Nissan's XTRONIC CVT transmission, with six-speed manual mode.
The second petrol engine, which also displaces 1.6-litres and has four valves per cylinder, is an extensively reworked member of the HR family. Designated HR16DE, it has undergone a number of significant changes with a larger exhaust manifold, a retuned intake manifold, twin VTC, improved intake tumble flow and new catalyst with a hexagon cell formation.
New pistons with revised crowns and integral oil jet cooling have been adopted along with low friction techniques such as diamond-like carbon coating on the valve lifters.
But the most significant change has been the development of a dual injector system - a world first - which has two injectors for each cylinder, each with smaller nozzles to deliver finer, more closely targeted sprays of fuel into the cylinders for more efficient atomisation and more complete combustion.
Together the changes have led to significant improvements in power, torque and fuel economy. The engine produces 86kW (117PS), representing a six per cent improvement over previous versions of the engine. Torque has improved by three per cent to 157Nm while economy figures show a 5.6 per cent improvement. The normally aspirated petrol engine powers two-wheel drive versions only, and will be available with either the five-speed manual or the updated XTRONIC CVT transmission option, a different CVT transmission to the one used with the DIG engine.
The final engine choice is the familiar Alliance developed K9K 1.5-litre dCi turbocharged common rail diesel. The 1,461cc eight-valve engine delivers good fuel economy, low emissions and running costs with excellent driveability.
With power rated at 81kW (110PS) at 4,000 rpm and torque at an impressive 240 Nm at 1,750 rpm this unit features a fuel return rail and control unit for improved fuel efficiency. Injection pressure is 1,600 bar. Improved glow plug performance speeds up cold start performance. Emission control systems include a diesel particulate filter (DPF), with a fifth injector for regeneration and cooled exhaust gas recirculation while the turbocharger layout altered to make the distance between it and the DPF as short as possible.
The diesel will be available on two-wheel drive models with the six-speed manual transmission. For Europe, all the engines are fully Euro 5 compliant.
While the manual transmission has been carried over largely unchanged from Qashqai, both XTRONIC CVT systems feature a number of key technologies that promise significant improvements in weight, packaging, performance and fuel efficiency.
The updated XTRONIC CVT unit, used with the conventional 1.6-litre petrol engine, is 10 per cent shorter than before and 13 per cent lighter while internal friction has been reduced by a remarkable 30 per cent. This unit is the world's first CVT with a sub planetary gear which allows a far higher transmission ratio - 7.3:1 - than previous Nissan CVTs. Smaller, lighter pulleys, a flexible lock up damper and a more efficient oil pump all promote great fuel efficiency.
The XTRONIC CVT with 6-speed manual mode in the turbocharged petrol-engined Nissan Juke has been tuned for a more sporting performance with revised manual modes for sharper acceleration while the management system has been reprogrammed to enhance fuel efficiency. Both CVTs have adaptive shift control systems that can be selected via the Nissan Dynamic Control System.
Unusually in its class, Nissan Juke will be available with the option of four-wheel drive in addition to conventional front-wheel drive. A newly developed all-wheel drive system is based on Nissan's ALL-MODE 4x4-i electronic technology but which now adds a lateral torque-vectoring capability to its armoury.
As well splitting torque front to rear - upto a maximum of 50:50, it can now be split from side to side across the rear axle, too. By monitoring vehicle speed, wheel speed, gear position, steering angle, lateral G forces and now vehicle yaw rate, torque distribution can be increased to the outside rear wheel in corners to cut understeer and enhance the car's cornering ability. In total, upto 50% of the total available engine torque can be sent to either rear wheel.
The new rear axle incorporates electric couplings at either end plus a new final drive The inclusion of this innovation is a first in the small car segment - a technology that has, until now, only been found on top-of-the-range, premium vehicles.
The new system is noticeably lighter and more compact than similar systems used by some other manufacturers.
Equipment and model lines
Just about the only conventional aspect to Nissan Juke is the model line-up, which follows Nissan's established Visia, Acenta and Tekna lines. Lists of standard and optional equipment will be released nearer the on sale date, but expected items such as climate control, leather upholstery, rear view camera and Intelligent Key will all be available to Nissan Juke customers along with some more unusual features.
One such is Nissan Dynamic Control System, a central command and display module which allows the driver to alter dynamic drive settings as well as make changes to more obvious functions such as climate control.
Cleverly, the module adopts different displays, colours and functions depending on how it is being used. In Climate mode, the display shows the interior temperature setting while the 'buttons' display air-flow preferences.
But in D-Mode, the buttons change to Normal, Sport and Eco driving modes, altering throttle maps, torque availability, CVT shift schedules, steering effort and even air conditioning performance to suit the conditions. The display, meanwhile, shows engine and drive related dials and information.
Car settings, such as the sensitivity of automatic headlights, can also be adjusted via the system, while the display changes colour to signify what type of information is being displayed. Driving information incorporates panels giving average speed, fuel economy, journey times and so on. Overall, the display is designed to add a feeling of cool, engaging technology to the interior.
Accessories
Although Nissan Juke has a long list of standard equipment, Nissan has developed a full range of accessories enabling owners to personalise their cars still further. Among the items on offer are different designs of alloy wheel as well as front and rear under body protectors to accentuate the SUV element of the design.
Other exterior features include exhaust finishers, a roof spoiler and wind deflectors on the doors, while inside an owner can add illuminated door sills and interior accent lighting. Practical touches include advanced security systems as well as extra storage opportunities in the front armrest and in the luggage area.
European Customers
"The incredible success of our Qashqai compact crossover - we've recently passed half a million sales in Europe alone - has shown that customers are fed up with conventional cars. Nissan Juke is even bolder, even more adventurous than Qashqai and is set to confirm Nissan's position as a pioneer of crossover in Europe and, indeed, globally," says Simon Thomas.
Nissan Juke has been conceived with the specific intention to fulfil unmet customer expectations by adding much dynamism and masculinity to the sober, safe small car market. Who does Nissan imagine will buy Juke in Europe?
Clearly Urbanite, male customers are expected to be predominant but a significant proportion of buyers are anticipated to be women - one third according to Nissan's estimates. Nissan Juke will attract a younger audience than average Nissan customers (under half will be below 40), these estimates shows that Nissan Juke will have a broad appeal, supporting Nissan's research that there is widespread disillusionment at the lack of excitement in the small car sector in Europe.
Sales of Nissan Juke will come largely from the B-segment and is also expecting to attract C-segment customers, with people trading down to enjoy something more radical and inspirational. As with the successful Nissan Qashqai, a large majority of Nissan Juke customers will be new to the Nissan brand.

Sunday, June 26, 2011

Peugeot 308 SW

he new Peugeot 308 comes with a new look, features innovative e-HDi micro-hybrid technology and optimises fuel consumption and CO2 emissions, which start from just 98 g/km.
With its new lines, the Peugeot 308 subtly incorporates the Marque's latest stylistic codes. The car's body follows the contours of the mechanical assembly underneath. The appeal of the three body shapes (Saloon, CC and SW) thus acquires a more technological elegance, illustrated by the presence of LED front lights with light guide. Dynamism and emotion are present as ever in the genes of the 308, particularly with its more assertive look thanks to new Xenon headlamps with titanium coloured mask and the hatchback in its exclusive GTi finish.

Determined to consolidate its leadership in terms of road holding and driving pleasure, the Peugeot 308 seeks to become a reference in terms of environmental efficiency. Indeed, following in the footsteps of the 508, the new Peugeot 308 features innovative e-HDi micro-hybrid technology, the latest generation STOP & START, on the 1.6 litre HDi FAP 112 bhp Euro 5 engine. This offer, on the "entry level" engine, is available with a semi-automatic manual gearbox and, for the first time, with a full manual gearbox, for optimal driveability.

In addition to micro-hybrid technology, all factors impacting the level of CO2 emissions have been optimised:
  • weight reduced by 25 kg on average per car;
  • launch of 16" tyres with Very Low Rolling Resistance;
  • optimisation of the latest generation engines (VTi, THP, HDi Euro 5);
  • Cx of 0.28 for versions with a low fuel consumption - A record in the segment.
Fuel consumption sets the standard:
  • 98 g/km of CO2 for the 308 saloon 1.6 litre e-HDi FAP 112 bhp BMP6 - A record in the segment
  • available power trains, comprising 4 petrol engines ranging from 98 bhp to 200 bhp for the exclusive GTi version and 4 diesel engines from 92 bhp to 163 bhp, have also been optimised to ensure a comprehensive range of engines guaranteeing environmental efficiency. As a result, the basic version - the 308 saloon 1.6 litre HDi FAP 92 bhp with manual gearbox - is well positioned, with CO2 emissions reduced to only 110 g/km.
The dimensions and quality of equipment on the new Peugeot 308 remain unchanged, regardless of body shape, guaranteeing a spacious and comfortable passenger compartment. The same is true of primary, secondary and tertiary safety, which remain at the highest level.
The new Peugeot 308 will receive its world premiere at the 2011 Geneva Motor Show and will go on sale from April 2011 in Europe. Its mission is to continue the success story of the 308 family, with nearly 900,000 models sold since its launch in September 2007.
ELEGANT LINES ENHANCED BY ADVANCED TECHNOLOGY
The design of the new Peugeot 308 subtly incorporates the new stylistic codes of the Peugeot Marque. While the dimensions are unchanged, the new lines marry as closely as possible the car's mechanical assembly to accentuate its athletic poise, while the front aspect gives a fresh look to the "floating" front grille concept. Greater importance accorded to unbroken surfaces marks a determination to present an elegant and luxurious style. The central protective capping, available in a black lacquer finish, has been made thinner to give greater prominence to the sheer metal. This is also true of the single air intake which is now smaller in size.
Styling elements enhance the natural elegance which emanates from the new 308. A satin chrome bead enhances the new front grille, as do horizontal bars, available in lustrous black or chrome according to body shape (saloon, CC or SW).
The bottom section of the lower front panel, which helps visually to broaden the car and "plant" it on the road, incorporates new dual-function lights (daytime and sidelights) shaped like a boomerang, available according to versions. With their meticulous finish, they blend perfectly and are harmoniously positioned on the upper surround of the fog light housing. Composed of variable intensity LEDs and a light guide, they guarantee a unique visual signature by day and by night while illustrating the high level of technology featured on the new 308.
In the upper section, the V-shaped nose of the bonnet is one of the main expressive features of the Peugeot 308. It has been redesigned to fit the car's mechanical assembly as closely as possible and provides a new link with the floating front grille, in line with Peugeot's new stylistic codes. The Marque badge, in its new dual material construction, is proudly positioned at the tip of the bonnet on a new black lacquer base set with a chrome bead, also in the shape of a V.
The outline of this nose, fluid and characteristic, is more curvaceous, particularly at the junction of the lights and the bonnet. The new smooth glass front headlamps, closely fitting the three cylinders, suggest a look that is both refined and assertive. And when the 308 is equipped with dynamic bi-directional Xenon headlamps complete with titanium coloured base, this look becomes even more profound, displaying all the strength of character of the new 308.
The dynamism of the front aspect is echoed on the sides of the car. A styling line, running from the front wheel arches, crosses the side of the body and the rear lights before dropping towards the lower rear panel and coming to an end in the lower section.
The fluidity of the style is enhanced by the lateral glazed surface which follows a plunging waistline, and also by the panoramic rear window, which overlaps the rear quarter panel pillars.
Lastly, to establish the general appearance of the Peugeot 308, a lower waistline starting from the lower front panel extends as far as the rear bumper. The car therefore seems well poised on the road, ready to exploit its dynamic qualities to the full . New diamanté effect 16 or 17 inch alloy wheels or Storm Grey 18 inch wheels for the GTi version underline this dynamic appeal. The sense of dynamism is enhanced further by the car's rear style.
On the saloon, the wraparound lower rear panel adds a note of robustness and perceived quality as well as a sporty touch thanks to the presence of a styling element in the shape of a spoiler and two inserts, which can have a chrome finish, suggesting exhaust nozzles. The new Lion takes its place in the centre of the tailgate, while a satin chrome bead emphasizes the horizontal waistline, bringing a new balance to the rear of the 308.
On the SW, the contours of the robust lower panel and the rear lights have been designed to allow a wide boot aperture. The low load sill resulting from this design promises easy loading and a large internal capacity. From an aesthetic point of view, a horizontal waistline runs around the rear tailgate in its central section to "stretch" the car. This sensation is amplified by the body-coloured number plate insert surmounted by the new Lion badge.
On the CC the strength of the rear style is repeated, with a sense of horizontality given to the rear aspect that reinforces the impression of width. Numerous details add to this overall effect: the concave movement crossing the tailgate under the spoiler, the chrome bead framing the number plate and the presence of an air diffuser in the lower section. On either side and extending over the wings, the ruby-coloured LED rear lights with light curtain effect broaden the silhouette and give the 308 CC a unique and spectacular visual signature.
A FLUID AND LUXURIOUS INTERIOR
Stylists worked hard to exploit to the full the interior volumes freed up by the semi-tall architecture of the Peugeot 308. They therefore designed a particularly inclined fascia panel, almost symmetrical to the front windscreen pillars, to offer unimpeded exterior visibility.
In addition, there was a marked determination to give the interior a very upmarket feel and an enhanced sense of perceived quality. The result is a fluid, pure and elegant fascia panel where pride of place is given to superior materials, according to finish: soft covering, leather trim, chrome, black lacquered materials... The care given to the finish and the emphasis on interior comfort are evident in every detail. According to the level in the range, new motifs decorate the door panel strips, panel trim, thumb rests on the steering wheel, etc. Similarly, the special seats on the GTi version have red visible stitching with specific marking on top of the seat back and an aluminium steering wheel ring showing the word "GTi". Dark-tinted rear windows combined with dark wheel trims (Storm Grey) and the titanium mask of the discharge lamps, give this version a sporty and assertive identity, perfectly in keeping with the dynamic potential of its 1.6 litre THP 200 bhp engine.
Inside the 308 CC, the eye is caught also by the elegance of the 4 seats with integral head restraints and the possibility of full leather trim on the fascia panel, in different shades, which convey a touring car image. This distinctive design makes for even more comfortable seats with an Airwave warm air diffuser behind the necks of the front passengers. The pleasure of open-top driving is thus enhanced.
A SPACIOUS AND BRIGHT PASSENGER CO MPARTMENT
The passenger compartment has been designed to ensure that a sense of space and brightness predominates, making occupants feel they don't want their journey to end.
The interior dimensions and efforts by the designers to free up as much space as possible for passenger comfort make the 308 one of the most spacious cars in its segment.
Elbow width at the front is 1464 mm for the saloon and SW body shapes, and rises to 1492 mm for the Coupé Cabriolet version. At the rear, these dimensions are respectively 1471 mm and 1321 mm for the CC. The feeling of space is even more noticeable on account of the many clever storage spaces available inside the Peugeot 308. Total storage capacity is 42 litres, making life inside the car easier and preserving space for the occupants.
All of the 7 passengers that can be seated in the 308 SW thanks to the optional additional 2 rear seats can benefit from these fitted spaces. They can also modulate and adjust the car's interior as necessary by opting for individual seats in row 2. Nor has the boot volume been ignored, with a capacity under the parcel shelf of 674 litres for the SW and 430 litres for the saloon. With the load potential exploited to the full, the capacities are 2149 and 1398 litres respectively.
On the CC, all four passengers can benefit from the availability of a large boot capacity (465 litres) in the coupé configuration. On the cabriolet, with the retractable roof stored in the boot, the boot still offers a capacity of 266 litres. What's more, it only takes 20 seconds to convert the 308 CC into a dynamic coupé or an elegant cabriolet.
Passengers in the Peugeot 308 saloon and SW will also be able to benefit from a "sunny" passenger compartment thanks to the panoramic roofs available for these body shapes. They increase the total glazed surface area to 4.86 m² on the saloon and 5.58 m² on the SW. The light level inside the car can be regulated by means of an electrically-operated roller blind associated with this equipment.
To make the journey even more pleasant, automatic dual-zone air conditioning is available. With its active charcoal filter, it also reduces hydrocarbon odours inside the passenger compartment.
Finally, passengers will be able to benefit from a high quality audio and telematics system: WIP Sound audio system, Bluetooth hands-free kit, WIP Nav satellite navigation and WIP Com 3D with a retractable 7" 16/9 colour display. A JBL hi-fi system is also available and may be combined with laminated side windows for optimal acoustic performance.
Regardless of body shape, the new 308 offers a high level of comfort and convenience.
REDUCTION OF CO2
The reduction of CO2 emissions was one of the main objectives of this project. This resulted in a search for environmental efficiency at all levels. All factors influencing fuel consumption were optimised:
  • weight reduced by 25 kg on average per car;
  • launch of 16" tyres with Very Low Rolling Resistance;
  • use of a piloted oil pump on 1.6 litre HDi engines;
  • optimisation of operation of the alternator on some engines;
  • improvement of power steering control (electropump unit);
  • Cx of 0.28 for versions with a low fuel consumption - a record in the segment;
  • e-HDi micro-hybrid technology;
  • 98 g/km of CO2 for the 1.6 litre e-HDi FAP 112 bhp BMP6 version - a record in the segment
e-HDi MICRO-HYBRID TECHNOLOGY
After the 508, the new Peugeot 308 is the second of the Marque's cars to introduce the innovative e-HDi micro-hybrid technology, a new generation STOP & START.
This innovation is based on the combination of a 1.6 litre HDi Euro 5 diesel engine and a reversible alternator ensuring the STOP & START function. Relying on an alternator control system (Volt Control) to recover energy during deceleration and a hybrid battery to store and deliver additional energy on startup (e-booster), the HDi unit allows:
  • a 15% reduction in fuel consumption in urban traffic;
  • a 5 g/km reduction in CO2 emissions for approved cycle fuel consumption;
  • 40% faster restarting (400 ms) than with an enhanced starter STOP & START;
  • activation of engine cut-out from 20 km/h with a manual gearbox (8 km/h for the electronicallycontrolled gearbox);
  • increased driveability of the STOP & START (silent operation, no vibrations).
The second-generation reversible alternator used here has a power of 2.2 kW and allows up to 600,000 restarts. However the STOP & START function can be de-activated by the driver if preferred by means of a button on the fascia panel.
1.6 LITRE e-HDI FA P 112 BHP ENGINE
To deploy this technology on a large scale, the new Peugeot 308 proposes e-HDi technology with a "basic" engine, the 1.6 litre HDi FAP 112 bhp, which can be coupled with two gearboxes (manual or electronicallycontrolled). This is a first, since hitherto e-HDi technology was available only with the BVMP6 electronically-controlled gearbox. This new offer maximises driving enjoyment by increasing the phases of driving "in silence". When coupled with a manual gearbox, engine cut-out is possible from a speed of 20 km/h.
A CO MPREHENSIVE RANGE OF LATEST-GENERATION ENGINES
To reduce CO2 emissions as much as possible, the new 308 is uniquely equipped with the very latestgeneration engines for both petrol (VTi or THP engines) and diesel versions (new HDi Euro 5 engines).
On the saloon, all 8 available engines, as well as different possible gearbox combinations (manual, electronically-controlled manual or automatic), will allow every customer to find the version that suits them best.
4 Euro 5 petrol engines:
  • 1.4 litre VTi 98 bhp with 5-speed manual gearbox;
  • 1.6 litre VTi 120 bhp with 5-speed manual gearbox or automatic gearbox;
  • 1.6 litre THP 156 bhp with 6-speed manual gearbox or automatic gearbox;
  • 1.6 litre THP 200 bhp with 6-speed manual gearbox (exclusive to GTi version).
4 Euro 5 diesel engines:
  • 1.6 litre HDi FAP 92 bhp with 5-speed manual gearbox;
  • 1.6 litre e-HDi FAP 112 bhp with 6-speed manual gearbox or electronically-controlled manual gearbox;
  • 2.0 litre HDi FAP 150 bhp with 6-speed manual gearbox;
  • 2.0 litre HDi FAP 163 bhp with automatic gearbox or 6-speed manual gearbox (only on the 308 CC).
PEUGEOT KNOW-HOW
True to the Marque's values in terms of driving pleasure, the new Peugeot 308 seeks also to preserve its leadership in terms of road holding. The features that make the 308 a reference are maintained:
  • rigid body structure;
  • McPherson type front suspension;
  • rear suspension with torsion beam;
  • hydraulic dampers with valves;
  • power steering with variable assistance piloted by an electro-pump unit;
  • large disc brakes (ventilated at the front) - up to 302 x 26 mm;
  • ABS, electronic brake force distribution, emergency brake assist and automatic switching on of hazard warning lights as standard;
  • Bosch 8.1 ESP according to versions.
HIGH LEVEL SAFETY ON AL CO UNTS
Whether in terms of primary, secondary or tertiary safety, the new 308 is positioned at the highest level.
Firstly, the excellent rigidity of the structure ensures optimal operation of the wheels and suspension ensuring a high level of primary safety. In terms of secondary safety, the structure itself has been rigorously designed to withstand even the most severe impact, thanks in particular to a triple force channel at the front. The use of high-strength steel and "multilayer" reinforcements in specific areas has made it possible to raise the level of safety of occupants while reducing the overall weight of the car. In addition to the performance of the structure, efficient means of restraint are proposed:
  • up to 8 air bags on the saloon and SW;
  • up to 6 air bags on the CC, including 2 head air bags at the front;
  • extractible safety hoops on the CC in the event of rollover;
  • 3-point seat belts with belt not fastened or unfastened acoustic warnings;
  • Isofix fixtures.
Lastly, with regard to tertiary safety, the new Peugeot 308 benefits from Peugeot Connect services. Occupants are put through to an assistance helpline when an emergency call is made (Peugeot Connect SOS) or a breakdown service in the case of a mechanical incident (Peugeot Connect Assistance). These services are available via a Peugeot Connect unit or with the top-of-the-range WIP Com 3D telematics offer.

Friday, June 17, 2011

2011-2012 Peugeot 308 Hybrid Luxury Concept

In 2012, the Peugeot 308 Hybrid will be the second Peugeot model to benefit from the HYbrid4 power train. e-HDi micro-hybrid technology on the Peugeot 508 and the new Peugeot 308. The 2011 Peugeot 508 and the new 2011 Peugeot 308 Hybrid are the forerunners of the innovative e-HDi technology, a new generation STOP & START, prior to its deployment on other models in the range.

2011 Peugeot 308 Hybrid

2012 Peugeot 308 Hybrid ,e-HDi couples the 1.6 litre HDi Euro 5 engine with a reversible alternator ensuring the STOP & START function. Together with a system that recovers energy during deceleration and a hybrid battery that delivers additional energy on start-up (e-booster), the HDi unit allows:
- a 15 % reduction in fuel consumption in urban traffic;
- 40 % faster restarting than with a reinforced starter system;
- engine cut-out before the vehicle comes to a complete standstill;
- enhanced driveability (silent operation, absence of vibrations) and operating temperatures.

2012 Peugeot 308 Hybrid

The new Peugeot 308 Hybrid Electric: reality and intense The i0n is the first 100% electric new-generation urban car, designed for professional and private customers. The Lithium-ion batteries supplying its 47 kW (64 bhp) electric motor allow a maximum speed of 130 km/h (80.7 mph) and a range of 150 km (93 miles). 4 doors, 4 seats, silent, lively and practical, the iOn combines excellent capacity and compactness with unrivalled handling and very low running costs.

2012 Peugeot 308 Hybrid

Orders received for the iOn, which has already won a number of awards in Europe, outstripped production
volumes for the first quarter of 2011 Peugeot 308 Hybrid. o However, while for Peugeot “electricity” is now a reality, it can and must also be synonymous with “intensity”. This intensity is concentrated in the EX1 concept car. This exceptional 2-seater roadster is designed for intense sensations,
- with its two electric motors giving it a cumulative power of 340 bhp and 4-wheel drive;
- with its extreme aerodynamics;
- with its ultra-light structure.


2012 Peugeot 308 Hybrid

The 2012 Peugeot 308 Hybrid EX1 is built for performance: it has alreadyestablished or broken several approved acceleration records in France and China.

2011 Peugeot 3008 HYbrid4 Limited Edition

The 2011 Peugeot 3008 HYbrid4, the world’s first Diesel Hybrid:in Geneva, as a limited editionWith its launch of the world’s first diesel hybridvehicle, from mid-2011, Peugeot presents a new andoriginal offer in terms of environmental efficiencyand driving sensations.On the 3008 Crossover, the hybridisation of a dieselengine (2.0 HDi FAP 120 kW/163 bhp) driving thefront wheels and an electric motor with a capacity of 27 kW (37 bhp) at the rear sets the scene for 4-wheel drive, a maximum power of 200 bhp, a “zero emission” mode and standardised average fuel consumption starting from 3.8 litres/100 km (74.3 MPG).

2011 Peugeot 3008 HYbrid4 Limited Edition

The 2011 Peugeot 3008 HYbrid4 will be produced in France (in Sochaux and Mulhouse) and marketed in the spring of 2011 in Europe. Peugeot 3008 HYbrid4 benefits from the combined power of the HDi diesel engine and electric motor during acceleration and when an immediate surge of power is required (the “boost” function). The maximum combined power output is 200 bhp, 163 bhp from the 2.0 litre HDi FAP diesel engine and 37 bhp from the electric motor. A maximum torque of 500 Nm is available, split with 300Nm at the front from the HDi diesel engine and 200 Nm at the rear generated by the electric motor. The maximum combined power output is 200 bhp, 163 bhp from the 2.0 litre HDi FAP diesel engine and 37 bhp from the electric motor. A maximum torque of 500 Nm is available, split with 300Nm at the front from the HDi diesel engine and 200 Nm at the rear generated by the electric motor.

2011 Peugeot 3008 HYbrid4
2011 Peugeot 3008

Coupled with new driving enjoyment is a breakthrough in terms of CO2 emissions at just 99 g/km, a 35% reduction compared to a combustion engine of comparable power. At Geneva, Peugeot presents a Limited Edition 3008 HYbrid4: the 300 numbered cars, in Pearlescent White with two-tone full leather trim, can be reserved online as soon as the Motor Show opens. In 2012, the 508 will be the second Peugeot model to benefit from the HYbrid4 power train.

Sunday, June 5, 2011

2011 Peugeot 508 Strong Design Hybrid Concept

The commercial launch of the 2011 Peugeot 508 strong design at the service of emotion With the new 508, launched at the beginning of February in its leading European markets, Peugeot reaffirms its ambitions in one of its traditional strong suits, the large touring car segment. With its Saloon (4.79 m) and SW (4,81 m) body
shapes, its wide choice of economic petrol and diesel engines ranging from 112 to 204 bhp and its innovative equipment, the 508 is a modern car fully attuned to the aspirations of dynamic, demanding and responsible customers. The 2011 Peugeot 508 hybrid model will be fitted with a 2.0-litre diesel engine along with an electric motor, both combining to produce a total 200 hp. The car will have a four-wheel drive system. Fuel economy can go as low as 3.17 l/100 km.

2011 Peugeot 508

 The 2011 Peugeot 508 engine line-up will include a full range of VTi and THP engines. There will also be a hybrid version that will feature Peugeot’s e-HDi technology and a start/stop engine system. We may even see a Hybrid4 diesel flagship with lithium-ion battery technology. With the 508, the Marque reaffirms its presence and its ambitions in one of its traditional strong markets, the large touring car segment. Each model in the 2011 series has left an indelible mark in its time. The 508 is a modern, next generation vehicle, perfectly attuned to the aspirations of customers who have moved with the times: being dynamic, responsible, and increasingly demanding. Peugeot says the Hybrid4 508 will release no more than 99g/km of CO2 in hybrid mode, and - of course - no emissions at all in electric mode.

2011 Peugeot 508 Hybrid

The 2011 Peugeot 508 combines strong design and emotion with:
- its avant-garde technologies, including e-HDi (new generation STOP & START) and, from 2012, the HYbrid diesel hybrid power train;
- its environmental efficiency, assured by its optimised engines, its weight and its aerodynamics;
- its elegant and timeless style, which reflects the first developments of the Marques stylistic codes, its
streamlined, prestigious and dynamic appearance;
- its capacity, its perceived quality, its equipment, and its interior comfort and convenience;
- and of course its unique driving experience, based on the Marque’s longstanding expertise.

2011 Peugeot 508

With the 2011 Peugeot 508, Peugeot continues its international objectives: Produced in France (Rennes) for all markets except China, it will also be manufactured in its Saloon version in China (Wuhan), ready to go on sale from July 2011 on the world’s leading car market. For the first full year of marketing of the 508 (2012), Peugeot has set itself the target of 200,000 sales worldwide, with one third attributable to China, and a podium place in the M 2/D category of the European market.